ESD Training Course - EN 61340-5-1:2024: Protection of Electronic Devices and Headsets Against Electrostatic Phenomena, and Independent Verification of ESD Control System Compliance at ESTRON Vietnam (Denmark)

ESD Training Course – EN 61340-5-1:2024: Protection of Electronic Devices Against Electrostatic Phenomena

VINTECOM has successfully delivered an ESD control training course based on EN 61340-5-1:2024 and conducted an independent verification and assessment of the level of compliance of the Electrostatic Discharge (ESD) Control System for the manufacturing scope of electronic headset components at ESTRON Vietnam, a member company of ESTRON Denmark.

The EN 61340-5-1:2024 ESD protection training course delivered by VINTECOM International aims to equip participants with a thorough understanding of the latest requirements of the 2024 edition of EN 61340-5-1 for electrostatic discharge (ESD) control, ensuring compliance and improving manufacturing efficiency in electrostatic-sensitive environments.

1. Objectives of the Training Course Delivered by VINTECOM International

Understand the fundamental principles of electrostatics and the effects of ESD on electronic components.
Update knowledge of the latest changes and requirements introduced in EN 61340-5-1:2024 compared with the previous edition.
Learn how to establish, implement, and maintain an effective ESD Control Program in accordance with the standard.
Gain a thorough understanding of measurement, testing, and assessment methods for evaluating an organization's compliance with ESD requirements.
Practice ESD control techniques in the manufacturing environment, covering protective garments, grounding systems, Electrostatic Protected Areas (EPA), and safe handling procedures for electronic components.
Acquire the necessary knowledge and skills to prepare for independent ESD compliance verification against EN 61340-5-1.

2. ESD Compliance Verification Activities According to EN 61340-5-1

The ESD compliance verification activities include:

ESD System Inspection and Assessment: Conduct on-site assessments of manufacturing areas, laboratories, packaging areas, and storage areas within the EPA.
Measurement of Critical Parameters: Measure surface resistance, electrostatic voltage, and the electrostatic discharge performance of ionizers, protective garments, and equipment used in the EPA environment.
Verification of Operational Procedure Compliance: Examine the conformity of operating procedures, equipment maintenance practices, and environmental controls against EN 61340-5-1 requirements, including Protective Earth (PE) and Functional Ground (FG) grounding systems.
Risk Analysis and Improvement Recommendations: Identify areas of non-compliance and recommend corrective and improvement measures to enhance ESD control effectiveness.
Guidance on Nonconformity Correction: Provide guidance on corrective actions to address identified nonconformities and prepare the organization for independent compliance verification.

In addition, the verification activities include reviewing electrostatic voltage measurement methods based on the following models: Human Body Model (HBM), Charged Device Model (CDM), and Isolated Conductor Model, with reference to the requirements of EN 61340-5-1.

The following are key assessment activities for evaluating the implementation and application of these measurement methods:

1. Determining the ESD Sensitivity Level of Electronic Components in Accordance with Applicable Standards

When determining the ESD sensitivity level of electronic components, HBM and CDM testing is essential to ensure that devices are protected against electrostatic discharge damage.
Common standards requiring HBM and CDM testing include:

ANSI/ESDA/JEDEC JS-001 (HBM)
ANSI/ESDA/JEDEC JS-002 (CDM)
IEC 61340-3-1 (HBM and CDM)

2. Assessing Insulating Surfaces or Objects Within the Electrostatic Protected Area (EPA)

Within an EPA, insulating objects may include ungrounded workbenches, plastic containers, adhesive tapes, antistatic bags, and other insulating materials. The electrostatic voltage accumulated on these objects should be measured using the Isolated Conductor Model to evaluate potential ESD risks.
EN 61340-5-1 requires the control of insulating objects that may pose ESD risks. Therefore, measurements are necessary where no alternative control measures, such as ionization, are implemented.

3. When Required by Customers or Internal Standards

Assessments of compliance with customer-specific requirements and internal regulations may require testing and reporting of HBM, CDM, or Isolated Conductor measurement data.

4. When ESD-Related Product Failures Occur

When verifying whether product failures are caused by electrostatic discharge but the actual source of damage has not been clearly identified, measurements based on HBM, CDM, and Isolated Conductor models may be necessary to investigate and identify the potential sources of damage.
Evaluate the effectiveness of improvements to the ESD Control System and implement measures to prevent the recurrence of similar failures.

Figure 1: ESD Training and Assessment According to EN 61340-5-1:2024 at ESTRON Vietnam

VINTECOM International's training experts are carefully selected and approved based on established competency requirements, professional qualifications, and practical experience. All experts have at least 10 years of experience in quality management and have previously worked with foreign direct investment (FDI) companies and multinational technology and manufacturing corporations across global supply chains, including BMW, Mercedes-Benz, Porsche, Hyundai, Bosch, Nidec, Hyosung, Olympus, Samsung, and LG.

They have extensive experience serving as professional trainers and assessment experts, with in-depth knowledge and practical proficiency in applying productivity and quality management tools to improve and enhance manufacturing process capabilities. Their expertise includes VDA 6.3, IATF 16949, PSCR, the 5 Core Tools, Lean Six Sigma, 8D, 7 Muda, TPM, and other advanced quality and operational excellence methodologies.

Organizations and enterprises wishing to register for ESD training courses or consultancy services for EN 61340-5-1 / ANSI/ESD S20.20 certification – standards for developing and implementing Electrostatic Discharge (ESD) Control Programs throughout the electronic components supply chain – are welcome to contact VINTECOM International.

📶📶📶 CONTACT VINTECOM TO REGISTER FOR ESD TRAINING AND CONSULTANCY SERVICES FOR EN 61340-5-1 OR ANSI/ESD S20.20

Customers, organizations, and enterprises requiring ESD training or consultancy services for EN 61340-5-1 and ANSI/ESD S20.20 are kindly invited to click "Registration – Quotation" or use the registration function available on the bottom-right toolbar of the PC screen to receive a comprehensive quotation for the requested services.

📶📶📶 Further information, Please contact us as below:

☎ VINTECOM International Office in Ha Noi City: 16th Floor - Green Stars City, 234 Pham Van Dong Street, Phu Dien Ward, Hanoi City. Hotline 094-886-5288/ (024) 730-588-58

☎ VINTECOM International Office in Ho Chi Minh City: Glory Height Vinhome Grand Park - 88 Phuoc Thien Street, Long Binh Ward, HCM City. Hotline 0938-083-998/ (028) 7300-7588

VINTECOM INTERNATIONAL MANAGEMENT CONSULTANCY COMPANY

Head Office: No. 5 Hoang Sam treet, Nghia Do, Cau Giay district, Ha noi City

HANOI VINTECOM INTERNATIONAL OFFICE

Address: 16th Floor - Green Stars City

234 Pham Van Dong Street, Phu Dien Ward, Hanoi City

Tel : (024) 730.588.58/ (024) 730.333.86

Hotline: 094 886 5288

Skype: kd.vintecom

Email : office-hn@vintecom.com.vn

Web : www.vintecom.com.vn

HCM VINTECOM INTERNATIONAL OFFICE

Address : Glory Heights - Vinhomes Grand Park